When you reset the Technicolor CGA4234DGW to its factory default settings, all user-configured settings are lost, and the modem is returned to its initial configuration state. A separate router is required to provide Wi-Fi. Bridge - (Advanced) Functions only as a modem.Another router can be added to extend the network, but each network must use a different subnet. Routed - Functions as both a modem and Wi-Fi router, which is recommended for most members.The default username and password are case-sensitive, and are: A login screen for the Technicolor CGA4234DGW will appear.Enter 192.168.0.1 in your web browser's URL bar.Open up a web browser on your connected device.Connect a device to the modem by plugging an ethernet cable from your device into one of the LAN ports on the back of the modem, or by connecting your device to the modem over Wi-Fi.To access the Technicolor CGA4234DGW Configuration: NCF does not have access to firmware that it can provide to members. After the testing and approval process of a new version of firmware for a cable device, cable network operators may then automatically upgrade all cable modems connected on their network with the latest certified firmware. Operators run all cable devices and firmware versions through their own testing process, after which the device and firmware are certified for use on the cable network. The Technicolor CGA4234DGW available from NCF has been certified by the following cable network vendors for operation on their infrastructure:Ĭurrent certified firmware version: CGA4234-P15-13-CA902-c0200r181-191007 (on the Rogers cable network)Ĭable network operators control what cable modems and firmware versions can be used on their networks.

Xtream technicolor modem